# General Discussion

**URL:** https://forum.sunfounder.com/c/general-discussion/8.md

[Latest](https://forum.sunfounder.com/latest.md) · [Categories](https://forum.sunfounder.com/categories.md) · [Tags](https://forum.sunfounder.com/tags.md)

---

## [About the General Discussion category](https://forum.sunfounder.com/t/about-the-general-discussion-category/15)

<div class="topic-metadata">

**Author:** [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Replies:** 0

</div>

Discuss anything and everything related to using Arduino and Raspberry Pi, building projects, learning programming, learning electronics, etc.

---

## [Fusion HAT+ on Orange Pi Zero 3W - Experimental community port](https://forum.sunfounder.com/t/fusion-hat-on-orange-pi-zero-3w-experimental-community-port/5075)

<div class="topic-metadata">

**Author:** [@Noog](https://forum.sunfounder.com/u/Noog)\
**Replies:** 1\
**Last updated:** [November 9, 2026, 6:53am UTC](https://forum.sunfounder.com/t/fusion-hat-on-orange-pi-zero-3w-experimental-community-port/5075 "2026-11-09T06:53:42Z")

</div>

Thanks to SunFounder and the developers of fusion-hat! I’ve been using the Fusion HAT+ on a couple of robotics projects and have really enjoyed working with it. I wanted to see if I could get the HAT+ running on an Oran…

---

## [Pironman 5 upgrade (Dual NVMe Expansion Board)](https://forum.sunfounder.com/t/pironman-5-upgrade-dual-nvme-expansion-board/4798)

<div class="topic-metadata">

**Author:** [@Andy](https://forum.sunfounder.com/u/Andy)\
**Replies:** 5\
**Last updated:** [October 28, 2026, 2:51pm UTC](https://forum.sunfounder.com/t/pironman-5-upgrade-dual-nvme-expansion-board/4798 "2026-10-28T14:51:00Z")

</div>

I currently have a Pironman 5 with a single SSD and would like to upgrade it to support RAID-1. Since my current Pman5 is used as my main working computer are there installation instructions included with the upgrade wh…

---

## [Raspad 3 case STL](https://forum.sunfounder.com/t/raspad-3-case-stl/351)

<div class="topic-metadata">

**Author:** [@sillyname123](https://forum.sunfounder.com/u/sillyname123)\
**Replies:** 8\
**Last updated:** [October 26, 2026, 10:01am UTC](https://forum.sunfounder.com/t/raspad-3-case-stl/351 "2026-10-26T10:01:36Z")

</div>

I’d like to design and 3D print a roomier back case for my Raspad 3, I’d like to have room for a few more things inside. Could a get an editable 3D file of the original back case?

---

## [ESP32 MQTT Projects: How Do You Handle Reconnection and Message Loss?](https://forum.sunfounder.com/t/esp32-mqtt-projects-how-do-you-handle-reconnection-and-message-loss/5061)

<div class="topic-metadata">

**Author:** [@rachana62](https://forum.sunfounder.com/u/rachana62)\
**Replies:** 0\
**Last updated:** [October 26, 2026, 1:32am UTC](https://forum.sunfounder.com/t/esp32-mqtt-projects-how-do-you-handle-reconnection-and-message-loss/5061 "2026-10-26T01:32:15Z")

</div>

I’ve been exploring MQTT communication with ESP32 using ESP-IDF, particularly for IoT projects that send sensor readings to a dashboard and receive commands from a remote application. One thing I like about MQTT is its …

---

## [Can't get 74HC595 and 4 digit display to work](https://forum.sunfounder.com/t/cant-get-74hc595-and-4-digit-display-to-work/5013)

<div class="topic-metadata">

**Author:** [@Fireman9143](https://forum.sunfounder.com/u/Fireman9143)\
**Replies:** 2\
**Last updated:** [September 28, 2026, 8:21am UTC](https://forum.sunfounder.com/t/cant-get-74hc595-and-4-digit-display-to-work/5013 "2026-09-28T08:21:29Z")

</div>

I have the Fusion hat on a Pi5 and am going through the python examples. Lesson 1.8 does not work. I have spent days using chatgpt to try to troubleshoot and even ordered more 74HC595 chips. There seems to be a proble…

---

## [Dual boot on pironman5 max](https://forum.sunfounder.com/t/dual-boot-on-pironman5-max/3974)

<div class="topic-metadata">

**Author:** [@fozzy235](https://forum.sunfounder.com/u/fozzy235)\
**Replies:** 14\
**Last updated:** [September 20, 2026, 9:37am UTC](https://forum.sunfounder.com/t/dual-boot-on-pironman5-max/3974 "2026-09-20T09:37:48Z")

</div>

All I can find on this topic is that one OS on NVME and the other on SD card, is that true or can you have different OS’s on the two NVME option

---

## [Musing about setting up a tv](https://forum.sunfounder.com/t/musing-about-setting-up-a-tv/4963)

<div class="topic-metadata">

**Author:** [@1lor](https://forum.sunfounder.com/u/1lor)\
**Replies:** 1\
**Last updated:** [August 27, 2026, 10:07am UTC](https://forum.sunfounder.com/t/musing-about-setting-up-a-tv/4963 "2026-08-27T10:07:11Z")

</div>

I am new to all this, is it possible to set up a tv I have Pironman 5 Max Raspberry Pi 5 I’m talking the antenna version. Yes it’s all digital today but just wondered out of curiosity if it’s at all possible?

---

## [Dashboard will not launch after apt update](https://forum.sunfounder.com/t/dashboard-will-not-launch-after-apt-update/4889)

<div class="topic-metadata">

**Author:** [@delaneybill](https://forum.sunfounder.com/u/delaneybill)\
**Replies:** 5\
**Last updated:** [August 3, 2026, 7:28am UTC](https://forum.sunfounder.com/t/dashboard-will-not-launch-after-apt-update/4889 "2026-08-03T07:28:49Z")

</div>

I have PiRonman 5 MAX running for some time and after an apt update and upgrade I can no longer open site :34001. I have a Raspberry Pi 5 running Raspberry Pi OS (Legacy, 64-bit) port of Bookworm 2026-06-18. Any suggest…

---

## [Pironman 5 Loss of disk I/O a half hour after boot](https://forum.sunfounder.com/t/pironman-5-loss-of-disk-i-o-a-half-hour-after-boot/4824)

<div class="topic-metadata">

**Author:** [@Cranky](https://forum.sunfounder.com/u/Cranky)\
**Replies:** 10\
**Last updated:** [July 23, 2026, 1:16am UTC](https://forum.sunfounder.com/t/pironman-5-loss-of-disk-i-o-a-half-hour-after-boot/4824 "2026-07-23T01:16:48Z")

</div>

Running a Raspi 5 16G in a Pironman 5 case. 45W power supply. The system runs fine for about a half hour or so, but eventually it partly shuts down. I can move the mouse around, and I can open the Raspi’s app menu, bu…

---

## [Would a PiDog simulator be useful?](https://forum.sunfounder.com/t/would-a-pidog-simulator-be-useful/4857)

<div class="topic-metadata">

**Author:** [@JMC](https://forum.sunfounder.com/u/JMC)\
**Replies:** 0\
**Last updated:** [July 14, 2026, 6:11pm UTC](https://forum.sunfounder.com/t/would-a-pidog-simulator-be-useful/4857 "2026-07-14T18:11:12Z")

</div>

I’m working on a PiDog simulation environment and would like to understand whether it would be useful to other owners and developers. Would you use a simulator to test PiDog code without the physical robot? If so, what …

---

## [Pironman V2 auto-start at boot not working](https://forum.sunfounder.com/t/pironman-v2-auto-start-at-boot-not-working/509)

<div class="topic-metadata">

**Author:** [@shigginswi](https://forum.sunfounder.com/u/shigginswi)\
**Replies:** 30\
**Last updated:** [July 1, 2026, 9:52am UTC](https://forum.sunfounder.com/t/pironman-v2-auto-start-at-boot-not-working/509 "2026-07-01T09:52:49Z")

</div>

I have everything working well but when I reboot it does not auto-start. If I manually start it works fine. here is what I get if I try to turn on auto start: root@RetroPie:/boot# pironman -a on enable auto-start at b…

---

## [PiDog Camera - Can't get started](https://forum.sunfounder.com/t/pidog-camera-cant-get-started/4464)

<div class="topic-metadata">

**Author:** [@224](https://forum.sunfounder.com/u/224)\
**Replies:** 27\
**Last updated:** [June 5, 2026, 1:40am UTC](https://forum.sunfounder.com/t/pidog-camera-cant-get-started/4464 "2026-06-05T01:40:10Z")

</div>

I checked the wiring and re-seated the cable, see Attachment A, B and C. The male ends seem to fit securely in the female sockets and both ends of the cable are locked in the sockets. I ran the following prompt with the …

---

## [RasPi OS new Trixie version](https://forum.sunfounder.com/t/raspi-os-new-trixie-version/3883)

<div class="topic-metadata">

**Author:** [@CPN200](https://forum.sunfounder.com/u/CPN200)\
**Replies:** 4\
**Last updated:** [May 6, 2026, 10:21am UTC](https://forum.sunfounder.com/t/raspi-os-new-trixie-version/3883 "2026-05-06T10:21:58Z")

</div>

Are there any known issues running the Pironman 5 software on the new Trixie image?

---

## [servo on galaxyrvr is working but](https://forum.sunfounder.com/t/servo-on-galaxyrvr-is-working-but/4594)

<div class="topic-metadata">

**Author:** [@Peshone](https://forum.sunfounder.com/u/Peshone)\
**Replies:** 7\
**Last updated:** [May 6, 2026, 9:36am UTC](https://forum.sunfounder.com/t/servo-on-galaxyrvr-is-working-but/4594 "2026-05-06T09:36:58Z")

</div>

servo on galaxyrvr is working but does not react to the command from my phone, how do I test the pin or the signal coming to the rover? thanks

---

## [How to respond to SunFounder\_Moderator](https://forum.sunfounder.com/t/how-to-respond-to-sunfounder-moderator/4583)

<div class="topic-metadata">

**Author:** [@bondo](https://forum.sunfounder.com/u/bondo)\
**Replies:** 0\
**Last updated:** [April 24, 2026, 10:21pm UTC](https://forum.sunfounder.com/t/how-to-respond-to-sunfounder-moderator/4583 "2026-04-24T22:21:00Z")

</div>

Not sure how to do this. I am new to “forum” and keep getting error that two replies are already there

---

## [OLED Screen Android 16: Tutorial](https://forum.sunfounder.com/t/oled-screen-android-16-tutorial/4576)

<div class="topic-metadata">

**Author:** [@aeonxyz](https://forum.sunfounder.com/u/aeonxyz)\
**Replies:** 0\
**Last updated:** [April 23, 2026, 5:38pm UTC](https://forum.sunfounder.com/t/oled-screen-android-16-tutorial/4576 "2026-04-23T17:38:12Z")

</div>

(topic deleted by author)

---

## [Pironman 5 max vibration sensor doesn't turn on oled](https://forum.sunfounder.com/t/pironman-5-max-vibration-sensor-doesnt-turn-on-oled/4553)

<div class="topic-metadata">

**Author:** [@\_rob](https://forum.sunfounder.com/u/_rob)\
**Replies:** 5\
**Last updated:** [April 15, 2026, 9:06am UTC](https://forum.sunfounder.com/t/pironman-5-max-vibration-sensor-doesnt-turn-on-oled/4553 "2026-04-15T09:06:51Z")

</div>

Hi everyone, today I put together a Pironman 5 Max and a RPi 5 (8GB). I copied the SD Card (Raspian) to NVMe. The SD card was flashed a few days ago. Now the system is running from NVMe. Everything is working as far as…

---

## [Ultimate Raspberry Pi 5 Silence: Noctua PWM Mod for Pironman 5 Case](https://forum.sunfounder.com/t/ultimate-raspberry-pi-5-silence-noctua-pwm-mod-for-pironman-5-case/4520)

<div class="topic-metadata">

**Author:** [@tuffant21](https://forum.sunfounder.com/u/tuffant21)\
**Replies:** 19\
**Last updated:** [April 11, 2026, 3:12am UTC](https://forum.sunfounder.com/t/ultimate-raspberry-pi-5-silence-noctua-pwm-mod-for-pironman-5-case/4520 "2026-04-11T03:12:25Z")

</div>

The Pironman 5 is a beast of a case, but let’s be honest—those stock fans can get loud. In this video, I walk you through a step-by-step hardware mod to swap them out for ultra-quiet Noctua 40…

---

## [Volumio, MoOde or other Music Streamer integration with Pironman 5 Max](https://forum.sunfounder.com/t/volumio-moode-or-other-music-streamer-integration-with-pironman-5-max/4514)

<div class="topic-metadata">

**Author:** [@NicJ001](https://forum.sunfounder.com/u/NicJ001)\
**Replies:** 0\
**Last updated:** [April 1, 2026, 4:27pm UTC](https://forum.sunfounder.com/t/volumio-moode-or-other-music-streamer-integration-with-pironman-5-max/4514 "2026-04-01T16:27:31Z")

</div>

Has anyone managed to build a Pironman 5 Max with full hardware integration of the Pironman Dashboard and use it as a Music Streamer in conjunction with a Pi5 16GB, NVMe, 3.5 inch 480x320 IPS Touch Screen and software su…

---

## [EzBlock in Browser](https://forum.sunfounder.com/t/ezblock-in-browser/4486)

<div class="topic-metadata">

**Author:** [@botibot](https://forum.sunfounder.com/u/botibot)\
**Replies:** 4\
**Last updated:** [March 24, 2026, 9:04am UTC](https://forum.sunfounder.com/t/ezblock-in-browser/4486 "2026-03-24T09:04:29Z")

</div>

Hi, I’ve tried to connect the Windows 11 Laptop to the Picar-X using EzBlock Web. Mostly working fine, except for the camera. This is blocked because of the external → local network connection safety blocks. Does anyone…

---

## [Problems loading Micropython into Rasberry Pi Pico](https://forum.sunfounder.com/t/problems-loading-micropython-into-rasberry-pi-pico/4484)

<div class="topic-metadata">

**Author:** [@John22](https://forum.sunfounder.com/u/John22)\
**Replies:** 1\
**Last updated:** [March 20, 2026, 10:23am UTC](https://forum.sunfounder.com/t/problems-loading-micropython-into-rasberry-pi-pico/4484 "2026-03-20T10:23:55Z")

</div>

I am using a LinuxMint laptop preloaded with Python 3.12.3. I downloaded the latest Thonny 4.1.7 micropython successfully. Unfortunately I have been unable to load the MicroPython into a Rasberry Pi Pico. I can connect…

---

## [Pidog iPad Controller](https://forum.sunfounder.com/t/pidog-ipad-controller/4328)

<div class="topic-metadata">

**Author:** [@224](https://forum.sunfounder.com/u/224)\
**Replies:** 27\
**Last updated:** [March 3, 2026, 4:03pm UTC](https://forum.sunfounder.com/t/pidog-ipad-controller/4328 "2026-03-03T16:03:01Z")

</div>

Instructions on website state: https://docs.sunfounder.com/projects/pidog/en/latest/python/py\_12\_app\_control.html cd ~/pidog/examples sudo python3 12\_app\_control.py and the results will be: Running on: http://192.16…

---

## [Adafruit\_DHT11 with RPi 4b](https://forum.sunfounder.com/t/adafruit-dht11-with-rpi-4b/4420)

<div class="topic-metadata">

**Author:** [@Rolph](https://forum.sunfounder.com/u/Rolph)\
**Replies:** 6\
**Last updated:** [March 2, 2026, 10:00am UTC](https://forum.sunfounder.com/t/adafruit-dht11-with-rpi-4b/4420 "2026-03-02T10:00:07Z")

</div>

Hi there, I’m quite new to RPi and was working on the tutorials of Paul McWorther. Now I came across the DHT11 temperature sensor where I was first notified about the ‘unkown platform error’ which I understand is linke…

---

## [System shutdown, power doesn't go off](https://forum.sunfounder.com/t/system-shutdown-power-doesnt-go-off/4393)

<div class="topic-metadata">

**Author:** [@matthew.persico](https://forum.sunfounder.com/u/matthew.persico)\
**Replies:** 1\
**Last updated:** [February 20, 2026, 7:44am UTC](https://forum.sunfounder.com/t/system-shutdown-power-doesnt-go-off/4393 "2026-02-20T07:44:58Z")

</div>

I shutdown the system and it is down, but the fans are still on. What can I check for?

---

## [Problem with esp32 camerapro kit](https://forum.sunfounder.com/t/problem-with-esp32-camerapro-kit/3116)

<div class="topic-metadata">

**Author:** [@Fionn](https://forum.sunfounder.com/u/Fionn)\
**Replies:** 6\
**Last updated:** [January 22, 2026, 6:25am UTC](https://forum.sunfounder.com/t/problem-with-esp32-camerapro-kit/3116 "2026-01-22T06:25:29Z")

</div>

I am attempting to upload the code found here: 2.13 Camera Web Server — SunFounder ESP32 Starter Kit documentation However I get the following error: /Users/user/Downloads/esp32\_webcam/iot\_2\_camera\_server\_copy-1/app\_htt…

---

## [Robot Hat V4 has no light to zero the servo](https://forum.sunfounder.com/t/robot-hat-v4-has-no-light-to-zero-the-servo/4174)

<div class="topic-metadata">

**Author:** [@shiver](https://forum.sunfounder.com/u/shiver)\
**Replies:** 9\
**Last updated:** [January 12, 2026, 6:37am UTC](https://forum.sunfounder.com/t/robot-hat-v4-has-no-light-to-zero-the-servo/4174 "2026-01-12T06:37:21Z")

</div>

My robot hat doesnt have the green blinking light to zero the servo. How do I zero the servo before I finish putting it together?

---

## [Trouble running pico-2w-kit-main\\micropython\\7.7\_game\_guess\_number.py](https://forum.sunfounder.com/t/trouble-running-pico-2w-kit-main-micropython-7-7-game-guess-number-py/4116)

<div class="topic-metadata">

**Author:** [@DannyPico2W](https://forum.sunfounder.com/u/DannyPico2W)\
**Replies:** 1\
**Last updated:** [December 18, 2025, 7:51am UTC](https://forum.sunfounder.com/t/trouble-running-pico-2w-kit-main-micropython-7-7-game-guess-number-py/4116 "2025-12-18T07:51:57Z")

</div>

Hello everyone, I am having trouble running pico-2w-kit-main\\micropython\\7.7\_game\_guess\_number.py I get the following error messages: Traceback (most recent call last): File “”, line 8, in File “lcd1602.py”, line 1…

---

## [I'm looking for dual stand alone Monitor /screen for pironman 5 max](https://forum.sunfounder.com/t/im-looking-for-dual-stand-alone-monitor-screen-for-pironman-5-max/4076)

<div class="topic-metadata">

**Author:** [@1lor](https://forum.sunfounder.com/u/1lor)\
**Replies:** 6\
**Last updated:** [December 8, 2025, 8:03pm UTC](https://forum.sunfounder.com/t/im-looking-for-dual-stand-alone-monitor-screen-for-pironman-5-max/4076 "2025-12-08T20:03:27Z")

</div>

I’m new to all this so not sure what is suitable. I have dual screen for my windows laptop but want separate ones for my pi 5 as I intend to us it just as additional computer. Nothing bigger than 16 inch can anyone rec…

---

## [Home Assistant Pironman 5 GPIO Fans and LED Control](https://forum.sunfounder.com/t/home-assistant-pironman-5-gpio-fans-and-led-control/4029)

<div class="topic-metadata">

**Author:** [@PJL](https://forum.sunfounder.com/u/PJL)\
**Replies:** 3\
**Last updated:** [November 18, 2025, 6:46am UTC](https://forum.sunfounder.com/t/home-assistant-pironman-5-gpio-fans-and-led-control/4029 "2025-11-18T06:46:31Z")

</div>

I just moved my Home Assistant installation to a Raspberry Pi 5/16 with no issues with the move. The Pi is installed in a Pironman 5 case (which I really like, especially for it’s SSD support, and I enjoyed assembling it…

[Next page](https://forum.sunfounder.com/c/general-discussion/8.md?page=1)
