# AI Fusion Lab 1.10 OLED

**URL:** <https://forum.sunfounder.com/t/ai-fusion-lab-1-10-oled/4528>\
**Category:** Learning kit for Raspberry Pi\
**Created:** [April 6, 2026, 6:26pm UTC](https://forum.sunfounder.com/t/ai-fusion-lab-1-10-oled/4528 "2026-04-06T18:26:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![paks](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.sunfounder.com/paks/32/1769_2.png) [@paks](https://forum.sunfounder.com/u/paks)\
**Post date:** [April 6, 2026, 6:26pm UTC](https://forum.sunfounder.com/t/ai-fusion-lab-1-10-oled/4528/1 "2026-04-06T18:26:26Z")

</div>

Hi! Again. If I do in lesson 1.10 OLED Display :sudo pip3 install adafruit-circuitpython-ssd1306 --break

will that break the dependencies again like ii did in the NeoPixel lesson? Or should I just skip the lesson?

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [April 7, 2026, 5:54am UTC](https://forum.sunfounder.com/t/ai-fusion-lab-1-10-oled/4528/2 "2026-04-07T05:54:33Z")

</div>

Thank you for the additional information. Next time, I will advise other customers to delete the old code package and clone it again.

---

<div class="post-metadata">

**Author:** ![paks](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.sunfounder.com/paks/32/1769_2.png) [@paks](https://forum.sunfounder.com/u/paks)\
**Post date:** [April 7, 2026, 3:35pm UTC](https://forum.sunfounder.com/t/ai-fusion-lab-1-10-oled/4528/3 "2026-04-07T15:35:54Z")

</div>

I think this reply should go to another of my post. The one on the RFID-RC522. But again thank you for the reply.