# Assembly mistake - forgot thermal pads

**URL:** <https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397>\
**Category:** General\
**Created:** [January 13, 2025, 8:29pm UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397 "2025-01-13T20:29:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![satow](https://avatars.discourse-cdn.com/v4/letter/s/3da27b/32.png) [@satow](https://forum.sunfounder.com/u/satow)\
**Post date:** [January 13, 2025, 8:29pm UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397/1 "2025-01-13T20:29:39Z")

</div>

I assembled everything and tested my Pironman 5 case, and it’s working.  
However when I was cleaning up, I realized that I had forgotten to install the thermal pads.  
How does one tell if your unit is overheating?  
Is this a critical, or can I run it as is?  
It doesn’t seem to be generating much heat.

---

<div class="post-metadata">

**Author:** ![Logix247](https://avatars.discourse-cdn.com/v4/letter/l/b3f665/32.png) [@Logix247](https://forum.sunfounder.com/u/Logix247)\
**Post date:** [January 13, 2025, 9:31pm UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397/2 "2025-01-13T21:31:39Z")

</div>

You might want to start to disable it - this is asking for a dead unit.

Did you run the install script fully? I’m having problems with the dashboard…

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [January 14, 2025, 9:49am UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397/3 "2025-01-14T09:49:30Z")

</div>

satow:The purpose of putting thermal pads is to transfer the temperature to the radiator aluminum quickly, so that the fan can blow away the heat easily.  
If you don’t have a thermal pad, the heat transfer may be slower. It won’t affect anything else.  
We have CPU temperature monitoring on our dashboard. (as shown)

 ![image (4)](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/original/2X/0/029eeed0ea36b15050d73e745a6d963c8c79c0d4.png)

Logix247: Our tutorial instructions by going to your browser and visiting http://:34001  
[https://docs.sunfounder.com/projects/pironman5/en/latest/control/control\_with%20dashboard.html](https://docs.sunfounder.com/projects/pironman5/en/latest/control/control_with%20dashboard.html)  
The IP is the network that the PI5 is configured for, the IP will be displayed on the OLED screen after you install the pironman5 software.  
For example, if your OLED screen shows the IP as: 192.168.0.125, then you go to your browser and type: [http://192.168.0.125:34001](http://192.168.0.125:34001) to access the dashboard.  
Instead of accessing: localhost:34001, is that what you are doing?

You can check the other posts users shared:

> [@Dashboard completely blank except for empty header](https://forum.sunfounder.com/t/dashboard-completely-blank-except-for-empty-header/2298/3):
>
> Apparently someone else had this issue ( [Pironman 5 Dashboard blank - General - Sunfounder Forum](https://forum.sunfounder.com/t/pironman-5-dashboard-blank/2293/13) ) , and the solution is to use the IP address of the device rather than localhost. While this is a good workaround for the dashboard to actually work, the code itself should probably be fixed so that the binding of the backend also happens on localhost/127.0.0.1 for the future…

---

<div class="post-metadata">

**Author:** ![Logix247](https://avatars.discourse-cdn.com/v4/letter/l/b3f665/32.png) [@Logix247](https://forum.sunfounder.com/u/Logix247)\
**Post date:** [January 14, 2025, 10:48pm UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397/4 "2025-01-14T22:48:20Z")

</div>

localhost somehow shows a failed to catch, but using the IP does work… weirdly enough…

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [January 15, 2025, 9:56am UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397/5 "2025-01-15T09:56:38Z")

</div>

You can access the dashboard from your IP address and it is working fine.  
Regarding your question about accessing the dashboard via localhost, we will take care of it.
