# Assembly mistake - forgot thermal pads

**URL:** <https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397>\
**Category:** General\
**Created:** [January 13, 2025, 8:29pm UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397 "2025-01-13T20:29:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [January 14, 2025, 9:49am UTC](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397/3 "2025-01-14T09:49:30Z")

</div>

satow:The purpose of putting thermal pads is to transfer the temperature to the radiator aluminum quickly, so that the fan can blow away the heat easily.  
If you don’t have a thermal pad, the heat transfer may be slower. It won’t affect anything else.  
We have CPU temperature monitoring on our dashboard. (as shown)

 ![image (4)](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/original/2X/0/029eeed0ea36b15050d73e745a6d963c8c79c0d4.png)

Logix247: Our tutorial instructions by going to your browser and visiting http://:34001  
[https://docs.sunfounder.com/projects/pironman5/en/latest/control/control\_with%20dashboard.html](https://docs.sunfounder.com/projects/pironman5/en/latest/control/control_with%20dashboard.html)  
The IP is the network that the PI5 is configured for, the IP will be displayed on the OLED screen after you install the pironman5 software.  
For example, if your OLED screen shows the IP as: 192.168.0.125, then you go to your browser and type: [http://192.168.0.125:34001](http://192.168.0.125:34001) to access the dashboard.  
Instead of accessing: localhost:34001, is that what you are doing?

You can check the other posts users shared:

> [@Dashboard completely blank except for empty header](https://forum.sunfounder.com/t/dashboard-completely-blank-except-for-empty-header/2298/3):
>
> Apparently someone else had this issue ( [Pironman 5 Dashboard blank - General - Sunfounder Forum](https://forum.sunfounder.com/t/pironman-5-dashboard-blank/2293/13) ) , and the solution is to use the IP address of the device rather than localhost. While this is a good workaround for the dashboard to actually work, the code itself should probably be fixed so that the binding of the backend also happens on localhost/127.0.0.1 for the future…

---

_[View the full topic](https://forum.sunfounder.com/t/assembly-mistake-forgot-thermal-pads/2397)._
