# EZBlock Language

**URL:** <https://forum.sunfounder.com/t/ezblock-language/2905>\
**Category:** General Discussion\
**Created:** [March 21, 2025, 11:08pm UTC](https://forum.sunfounder.com/t/ezblock-language/2905 "2025-03-21T23:08:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![robm](https://avatars.discourse-cdn.com/v4/letter/r/278dde/32.png) [@robm](https://forum.sunfounder.com/u/robm)\
**Post date:** [March 21, 2025, 11:08pm UTC](https://forum.sunfounder.com/t/ezblock-language/2905/1 "2025-03-21T23:08:59Z")

</div>

I am using EZBlock on a PiCar. Where can I get more instruction on the EZBlock language in general. For instance how can I add a volume adjustment to the Say command or other sound commands.  
Also the sound is working but the maximun volume is too low, is there any hardware mod to increase it - in this case the sound command is already set to 100% and higher settings have no effect

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [March 24, 2025, 5:12am UTC](https://forum.sunfounder.com/t/ezblock-language/2905/2 "2025-03-24T05:12:02Z")

</div>

Could you please let us know the current volume level of your speaker? Additionally, if possible, we recommend providing a video of the issue, as this will help us analyze and resolve the problem more effectively.

In the meantime, you can try the following steps to adjust the volume:

1. **Remote SSH Connection** : Connect to your robot’s IP address via SSH.
2. **Adjust Volume** : In the command line, run the `alsamixer` command and adjust the volume to the maximum level.
3. **Check Performance** : After adjusting the volume, test the speaker again to see if the issue is resolved.
