# Jumper wire graphic/labeling odd

**URL:** <https://forum.sunfounder.com/t/jumper-wire-graphic-labeling-odd/4915>\
**Category:** Learning kit for Raspberry Pi\
**Created:** [August 8, 2026, 8:33pm UTC](https://forum.sunfounder.com/t/jumper-wire-graphic-labeling-odd/4915 "2026-08-08T20:33:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ErinW](https://avatars.discourse-cdn.com/v4/letter/e/c89c15/32.png) [@ErinW](https://forum.sunfounder.com/u/ErinW)\
**Post date:** [August 8, 2026, 8:33pm UTC](https://forum.sunfounder.com/t/jumper-wire-graphic-labeling-odd/4915/1 "2026-08-08T20:33:20Z")

</div>

On page: [https://docs.sunfounder.com/projects/raphael-kit/en/latest/\_shared/component/cpn\_wires.html#cpn-wires](https://docs.sunfounder.com/projects/raphael-kit/en/latest/%5C_shared/component/cpn_wires.html#cpn-wires)

You show the following:

![image](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/optimized/2X/b/b4d7eb43f3303030e25fdaeffdb5cc85307a2100_2_690x55.png)

Um… that is actually a picture of a Female-to-Male jumper wire. I would suggest either reversing the graphic or changing the label because… that _could_ be confusing to some.

🙂

SUGGESTION: Change the labeling to “Female to Male” as on the Packing List that comes with the kit it lists these as “Jump wire F/M”

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [August 10, 2026, 10:10am UTC](https://forum.sunfounder.com/t/jumper-wire-graphic-labeling-odd/4915/2 "2026-08-10T10:10:45Z")

</div>

Thank you for your sharp eye – we really appreciate it. We’ll make sure to update this in the next revision.