# Pi-Crawler not connecting to Ezblock studio **URL:** \ **Category:** General\ **Created:** [January 3, 2026, 7:11pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200 "2026-01-03T19:11:17Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@Peter](https://forum.sunfounder.com/u/Peter)\ **Post date:** [January 3, 2026, 7:11pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/1 "2026-01-03T19:11:18Z")
Hi there, I got myself and my son a Pi-crawler with the Raspberry 4. The building part was fine. I installed the latest build of Ezblock on the microsd card and I do get the welcome sound when powering up the Pi-crawler. I must say that the customisation tab was greyed out before writing it on the sd so I couldn’t setup a hostname. Once I got the power sound and check on ezblock website I can’t connect because I don’t have the hostname. I tried ‘Raspberry’, ‘Raspberrypi’ and ‘raspberrypi-ezb’ but it fails each time. When I try to connect with the ios ezblock app, it does detect the rasbperrypi and there is a MAC address under it. But when I click on it it says “Bluetooth connection failed, please try again”. My ios is up to date. Can you give me a hand ? ---
**Author:** ![Spf650](https://avatars.discourse-cdn.com/v4/letter/s/f05b48/32.png) [@Spf650](https://forum.sunfounder.com/u/Spf650)\ **Post date:** [January 3, 2026, 7:30pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/2 "2026-01-03T19:30:25Z")
Possibly same as this? > [@What is the default login for EasyblockOS](https://forum.sunfounder.com/t/what-is-the-default-login-for-easyblockos/4182): > > I am looking for the default login for easyblockOS. While writing the image using raspberry pi imager 2.03, the customization option is not selectable. When booting to the image on the rpi, ssh keys are setup then it reboots to cli. I tried logging in using default ‘pi’ and pw ‘raspberry’ but login fails. I can connect to the pi with easyblocks web, but only if pi is connected by network cable. I also tried an earlier version of rpi imager (1.05) with same results and no config option. Can so… ---
**Author:** ![Peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@Peter](https://forum.sunfounder.com/u/Peter)\ **Post date:** [January 3, 2026, 7:41pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/3 "2026-01-03T19:41:26Z")
Thank you, Yes ! Although he says he’s able to connect with a “network cable” I tried ethernet but it doesn’t do anything. ---
**Author:** ![Peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@Peter](https://forum.sunfounder.com/u/Peter)\ **Post date:** [January 3, 2026, 7:53pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/4 "2026-01-03T19:53:56Z")
Just to be clear, he has the same issue as me but seems he hasn’t found an answer yet … ---
**Author:** ![Spf650](https://avatars.discourse-cdn.com/v4/letter/s/f05b48/32.png) [@Spf650](https://forum.sunfounder.com/u/Spf650)\ **Post date:** [January 3, 2026, 8:04pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/5 "2026-01-03T20:04:03Z")
I apologise, I may have misunderstood both of your requirements then. I thought that the other poster had got it working with 1.75, allowing password set up etc which I thought was your requirement, but that they then also wanted a direct method to run rather than via a Web interface? Sorry, if i misunderstood! ---
**Author:** ![Peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@Peter](https://forum.sunfounder.com/u/Peter)\ **Post date:** [January 3, 2026, 8:11pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/6 "2026-01-03T20:11:16Z")
Silly me ! Sorry I didn’t see the answers below the first message, I’m gonna try to find the 1.7.5 now, thank you again ---
**Author:** ![Spf650](https://avatars.discourse-cdn.com/v4/letter/s/f05b48/32.png) [@Spf650](https://forum.sunfounder.com/u/Spf650)\ **Post date:** [January 3, 2026, 8:50pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/7 "2026-01-03T20:50:40Z")
Hope you get it working for your son. If not, Sunfounder should be back in the office after the weekend, and to be honest their support is really good. ---
**Author:** ![Peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@Peter](https://forum.sunfounder.com/u/Peter)\ **Post date:** [January 3, 2026, 9:13pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/8 "2026-01-03T21:13:25Z")
It worked !!! I used the 1.9.6 build and could customise the ssh and connect !🙂 Thanks a lot !