# Pi-Crawler not connecting to Ezblock studio **URL:** \ **Category:** General\ **Created:** [January 3, 2026, 7:11pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200 "2026-01-03T19:11:17Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Spf650](https://avatars.discourse-cdn.com/v4/letter/s/f05b48/32.png) [@Spf650](https://forum.sunfounder.com/u/Spf650)\ **Post date:** [January 3, 2026, 7:30pm UTC](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200/2 "2026-01-03T19:30:25Z")
Possibly same as this? > [@What is the default login for EasyblockOS](https://forum.sunfounder.com/t/what-is-the-default-login-for-easyblockos/4182): > > I am looking for the default login for easyblockOS. While writing the image using raspberry pi imager 2.03, the customization option is not selectable. When booting to the image on the rpi, ssh keys are setup then it reboots to cli. I tried logging in using default ‘pi’ and pw ‘raspberry’ but login fails. I can connect to the pi with easyblocks web, but only if pi is connected by network cable. I also tried an earlier version of rpi imager (1.05) with same results and no config option. Can so… --- _[View the full topic](https://forum.sunfounder.com/t/pi-crawler-not-connecting-to-ezblock-studio/4200)._