# Pironman on Home Assistant OS 15.2 **URL:** \ **Category:** General\ **Created:** [June 19, 2025, 4:56pm UTC](https://forum.sunfounder.com/t/pironman-on-home-assistant-os-15-2/3390 "2025-06-19T16:56:28Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![MrMcGyver](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@MrMcGyver](https://forum.sunfounder.com/u/MrMcGyver)\ **Post date:** [June 19, 2025, 4:56pm UTC](https://forum.sunfounder.com/t/pironman-on-home-assistant-os-15-2/3390/1 "2025-06-19T16:56:28Z")
Due to support of the supervised version being deprecated, I recently migrated to full Home Assistant OS. I went back through the same instructions to configure my Pironman and it seems to be mostly working. OLED is working fine, the fan is working fine and follows the RGB style as well as the set temperature. The only issue is the RBG strip never lights up. This was all working when I had it configured with Raspberry Pi OS. Logs don’t show any errors. Tested with an additional power supply as well. ## Logs: s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service base-addon-banner: starting ## Add-on: Pironman Pironman support ## Add-on version: 1.0.12 You are running the latest version of this add-on. System: Home Assistant OS 15.2 (aarch64 / raspberrypi4-64) Home Assistant Core: 2025.6.1 Home Assistant Supervisor: 2025.05.5 ## Please, share the above information when looking for help or support in, e.g., GitHub, forums or the Discord chat. s6-rc: info: service base-addon-banner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service base-addon-timezone: starting s6-rc: info: service base-addon-log-level: starting s6-rc: info: service fix-attrs successfully started [10:48:41] INFO: Configuring timezone (America/Denver)… s6-rc: info: service base-addon-log-level successfully started s6-rc: info: service base-addon-timezone successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started Starting pironman with the following parameters: temperature\_unit: F fan\_temp: 90 display\_always\_on: true display\_on\_for: 30 rgb\_on: true rgb\_style: breath rgb\_color: FF0000 rgb\_speed: 50 rgb\_freq: 1000 rgb\_pin: 10 Warning: Cannot find boot configuration file set temperature unit to F set the fan on temperature to 90 set screen\_always\_on to on set screen\_off\_time to 30 set rgb\_enable to on set rgb\_style to breath set rgb\_color to FF0000 set rgb\_blink\_speed to 50 set rgb\_pwm\_freq to 1000 set rgb io to pin 10 (spi) restarting pironman stopping pironman pid=264 run in foreground 25/06/19 10:48:43,912 [DEBUG] Home Assistant Addon mode ------------------------25/06/19 10:48:43------------------------ pironman version: 2.2.6 username: config\_file: /opt/pironman/config.txt Kernel Version: Linux 6fa7f6d2-pironman 6.6.74-haos-raspi #1 SMP PREEMPT Mon Apr 14 16:32:39 UTC 2025 aarch64 aarch64 aarch64 GNU/Linux PCB info: Revision : d03115 Model : Raspberry Pi 4 Model B Rev 1.5 25/06/19 10:48:43,933 [DEBUG] power\_key\_pin : 16 25/06/19 10:48:43,933 [DEBUG] fan\_pin : 6 25/06/19 10:48:43,933 [DEBUG] update\_frequency : 0.5 25/06/19 10:48:43,933 [DEBUG] temp\_unit : F 25/06/19 10:48:43,933 [DEBUG] fan\_temp : 90.0 25/06/19 10:48:43,933 [DEBUG] screen\_always\_on : True 25/06/19 10:48:43,934 [DEBUG] screen\_off\_time : 30 25/06/19 10:48:43,934 [DEBUG] rgb\_enable : True 25/06/19 10:48:43,934 [DEBUG] rgb\_style : breath 25/06/19 10:48:43,934 [DEBUG] rgb\_color : FF0000 25/06/19 10:48:43,934 [DEBUG] rgb\_blink\_speed : 50 25/06/19 10:48:43,934 [DEBUG] rgb\_pwm\_freq : 1000 25/06/19 10:48:43,935 [DEBUG] rgb\_pin : 10 > > > 25/06/19 10:48:43,946 [DEBUG] rgb\_strip init success 25/06/19 10:48:43,958 [DEBUG] oled init success 25/06/19 10:48:43,976 [DEBUG] rgb\_show 25/06/19 10:48:43,977 [DEBUG] rgb\_show: breath 25/06/19 10:48:43,995 [DEBUG] Get IP: 192.168.1.6 Config: ![image](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/original/2X/3/3c5df3a38ac3c61131764d623f09d294e001cbef.png) ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [June 20, 2025, 10:47am UTC](https://forum.sunfounder.com/t/pironman-on-home-assistant-os-15-2/3390/2 "2025-06-20T10:47:21Z")
There may be compatibility issues between Home Assistant OS 15.2 and the Pironman component. We recommend using an earlier version of Home Assistant OS to install the Pironman component and see how it works. We will conduct testing and validation on Home Assistant OS 15.2 next week. ---
**Author:** ![MrMcGyver](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@MrMcGyver](https://forum.sunfounder.com/u/MrMcGyver)\ **Post date:** [August 6, 2025, 8:00pm UTC](https://forum.sunfounder.com/t/pironman-on-home-assistant-os-15-2/3390/3 "2025-08-06T20:00:46Z")
Just following up on this to see how testing and validation of Home Assistant OS 15.2 went/is going ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [August 8, 2025, 5:45am UTC](https://forum.sunfounder.com/t/pironman-on-home-assistant-os-15-2/3390/4 "2025-08-08T05:45:53Z")
We sincerely apologize for the inconvenience. Our team is currently investigating this issue, but we haven’t found any error logs so far. Additionally, during our testing, the RGB lights remain stuck on white and cannot be controlled or adjusted. We will need some additional time to resolve this and expect to provide you with an update by next week. In the meantime, we recommend installing the **Pironman software on a Raspberry Pi Bookworm OS** as a temporary workaround. ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [August 12, 2025, 6:24am UTC](https://forum.sunfounder.com/t/pironman-on-home-assistant-os-15-2/3390/5 "2025-08-12T06:24:23Z")
![image (21)](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/original/2X/d/dc7ae5871fa57939bca2c52c4ac319b01eacc075.png) We have resolved the issue. You need to add the following lines at the end of the config.txt file in the Pi Config Wizard component: core\_freq=500 core\_freq\_min=500 Click save and then reboot the system to resolve the RGB light issue. (See the image.)