# Pironman5 CPU Fan

**URL:** <https://forum.sunfounder.com/t/pironman5-cpu-fan/2038>\
**Category:** General\
**Created:** [November 29, 2024, 2:30pm UTC](https://forum.sunfounder.com/t/pironman5-cpu-fan/2038 "2024-11-29T14:30:40Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [December 3, 2024, 2:14am UTC](https://forum.sunfounder.com/t/pironman5-cpu-fan/2038/11 "2024-12-03T02:14:56Z")

</div>

1.PWM Fan Not Working  
The PWM fan on the Pironman 5 is controlled by the Raspberry Pi system. The operation of the PWM fan is based on the temperature of the Raspberry Pi 5:  
Below 50°C: The PWM fan remains off (0% speed).  
At 50°C: The fan starts at low speed (30% speed).  
At 60°C: The fan increases to medium speed (50% speed).  
At 67.5°C: The fan accelerates to high speed (70% speed).  
Above 75°C: The fan operates at full speed (100%).  
Please refer to our tutorial: [https ://docs.sunfounder.com/projects/pironman5/en/latest/advanced/fans.html#pwm-fan](https://docs.sunfounder.com/projects/pironman5/en/latest/advanced/fans.html#pwm-fan)

If you want the PWM fan to work, enter the following commands into /boot/firmware/config.txt:

dtparam=fan\_temp0=40000  
dtparam=fan\_temp0\_hyst=10000  
dtparam=fan\_temp0\_speed=125

Explanation:  
The first command sets the high temperature limit; if you want to set the maximum temperature to 25 or 30°C, use 25000 or 30000.  
The second command sets the time for the fan to stop.  
The third command sets the fan speed: 0 = off, 255 = 100%.

---

_[View the full topic](https://forum.sunfounder.com/t/pironman5-cpu-fan/2038)._
