# Pironman5 Max module **URL:** \ **Category:** General\ **Created:** [June 19, 2025, 3:28pm UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389 "2025-06-19T15:28:30Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![ronseamon](https://avatars.discourse-cdn.com/v4/letter/r/41988e/32.png) [@ronseamon](https://forum.sunfounder.com/u/ronseamon)\ **Post date:** [June 19, 2025, 3:28pm UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/1 "2025-06-19T15:28:30Z")
doesnt work. ronseamon@Pironman5MAX16:~ $ sudo systemctl status pironman5.service × pironman5.service - pironman5 service Loaded: loaded (/etc/systemd/system/pironman5.service; enabled; preset: en\> Active: failed (Result: exit-code) since Thu 2025-06-19 08:22:58 PDT; 19s \> Duration: 535ms Process: 1535 ExecStart=/usr/local/bin/pironman5 start --background --debug\> Main PID: 1537 (code=exited, status=1/FAILURE) CPU: 358ms Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: ^^^^^^ Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: File "/opt/pironman5/venv/lib\> Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: from pm\_auto.ws2812 import \> Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: File "/opt/pironman5/venv/lib\> Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: import board Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: File "/opt/pironman5/venv/lib\> Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: from adafruit\_blinka.agnost\> Jun 19 08:22:58 Pironman5MAX16 pironman5[1537]: ModuleNotFoundError: No module \> Jun 19 08:22:58 Pironman5MAX16 systemd[1]: pironman5.service: Main process exit\> Jun 19 08:22:58 Pironman5MAX16 systemd[1]: pironman5.service: Failed with resul\> lines 1-18/18 (END) how to fix? ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [June 20, 2025, 2:29am UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/2 "2025-06-20T02:29:39Z")
What version of the system are you currently using? Did you encounter any errors while installing the pironman5 software? If so, please provide the error messages to us. We recommend updating the pironman5 software and checking the results again. cd pironman5 git checkout -f 1.2.14 sudo python3 [install.py](http://install.py) ---
**Author:** ![ronseamon](https://avatars.discourse-cdn.com/v4/letter/r/41988e/32.png) [@ronseamon](https://forum.sunfounder.com/u/ronseamon)\ **Post date:** [June 20, 2025, 2:51am UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/3 "2025-06-20T02:51:37Z")
I want to reinstalling and it still gave me the error Used Groc and it told me to use the previous version of (something or other, I don’t remember) Now it works, however, the OLED screen will not stay lit. It turns off, and when I tap on the case, it will light back up, but then go back off.. I opened up the box and re-seated the ribbon cable, but it didn’t make any difference. I think the OLED is bad. ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [June 20, 2025, 7:55am UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/4 "2025-06-20T07:55:56Z")
This is normal behavior. The pironman5 max case has a timeout sleep function for the OLED screen in this version. Our software has a default timeout sleep time of 10 seconds. When you tap the case, the OLED screen will light up. This design is intended to protect the OLED screen. The onboard vibration switch is used to wake the sleeping OLED. If you do not need the sleep function, you can disconnect this jumper cap and set the sleep time to 0. To modify the timeout sleep command: sudo pironman5 -os ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [June 20, 2025, 7:56am UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/5 "2025-06-20T07:56:25Z")
![image (63)](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/original/2X/e/e7a531b2e96bae12d07cb9c6197067227e7286dc.png) ---
**Author:** ![ronseamon](https://avatars.discourse-cdn.com/v4/letter/r/41988e/32.png) [@ronseamon](https://forum.sunfounder.com/u/ronseamon)\ **Post date:** [June 20, 2025, 2:34pm UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/6 "2025-06-20T14:34:03Z")
I wish there was some documentation for this on the installation instructions I spent a lot of time fussing with it, trying to get it to work and thought I had a bad screen ---
**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\ **Post date:** [June 23, 2025, 6:07am UTC](https://forum.sunfounder.com/t/pironman5-max-module/3389/7 "2025-06-23T06:07:02Z")
We will improve the online tutorial as soon as possible. Based on your earlier description, the OLED screen is functioning normally. Additionally, our software has been updated to version 1.2.15. Please do the latest updates： cd pironman5 git pull sudo python3 [install.py](http://install.py)