# RaspberryPi 5 Not Detecting Camera of PiCar-X

**URL:** <https://forum.sunfounder.com/t/raspberrypi-5-not-detecting-camera-of-picar-x/4298>\
**Category:** Robotic kit for Raspberry Pi\
**Created:** [January 21, 2026, 9:52pm UTC](https://forum.sunfounder.com/t/raspberrypi-5-not-detecting-camera-of-picar-x/4298 "2026-01-21T21:52:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![quarry](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.sunfounder.com/quarry/32/2214_2.png) [@quarry](https://forum.sunfounder.com/u/quarry)\
**Post date:** [January 21, 2026, 9:52pm UTC](https://forum.sunfounder.com/t/raspberrypi-5-not-detecting-camera-of-picar-x/4298/1 "2026-01-21T21:52:39Z")

</div>

I attempted looking through other forum posts regarding camera issues, but those solutions have not helped my situation. I am trying to do example 7, but am running into issues regarding finding the camera.

When typing `rpicam-hello --list-cameras` into the terminal, it responds with “No Cameras Available!” I have tried troubleshooting using other commands, but none seem to recognize the camera. I went ahead and rewatched the PiCar-X tutorial on setting up the FPC Cable (or whatever it’s called – apologies, am a beginner to hardware), and reinserted to the corresponding slots. No avail.

Is there something I am missing?

---

<div class="post-metadata">

**Author:** ![quarry](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.sunfounder.com/quarry/32/2214_2.png) [@quarry](https://forum.sunfounder.com/u/quarry)\
**Post date:** [January 21, 2026, 10:11pm UTC](https://forum.sunfounder.com/t/raspberrypi-5-not-detecting-camera-of-picar-x/4298/2 "2026-01-21T22:11:55Z")

</div>

Nevermind. I have resolved the issue. Will leave post up so others encountering this will see my solution.

**THE SOLUTION**  
_type the line below into the terminal:_  
`sudo nano /boot/firmware/config.txt`

_type the line below into this file:_  
camera\_auto\_detect=1

Ctrl+O, Enter, Ctrl+X  
Reboot the Pi

Use the command `rpicam-hello --list-cameras` and the camera should appear
