# Remote Desktop Access for Raspberry Pi

**URL:** <https://forum.sunfounder.com/t/remote-desktop-access-for-raspberry-pi/1153>\
**Category:** Learning kit for Raspberry Pi\
**Created:** [May 27, 2024, 11:44pm UTC](https://forum.sunfounder.com/t/remote-desktop-access-for-raspberry-pi/1153 "2024-05-27T23:44:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![polskamaszyna](https://avatars.discourse-cdn.com/v4/letter/p/8baadc/32.png) [@polskamaszyna](https://forum.sunfounder.com/u/polskamaszyna)\
**Post date:** [May 27, 2024, 11:44pm UTC](https://forum.sunfounder.com/t/remote-desktop-access-for-raspberry-pi/1153/1 "2024-05-27T23:44:38Z")

</div>

I have a RasPi 4 model B and I also purchased the Raphael Kit - Ultimate Kit for Raspberry Pi. I’m following the included tutorial but I’m unable to complete the Remote Desktop Access for RasPi step via Windows PowerShell.

[Tutorial Link](https://docs.sunfounder.com/projects/raphael-kit/en/latest/install_setup_os/remote_windows.html)

I believe the hostname for my RasPi is: raspberrypi

However when I try the command “ping -4 raspberrypi.local” I receive this message: Ping request could not find host raspberrypi.local. Please check the name and try again.

 ![PowerShell](https://canada1.discourse-cdn.com/flex029/uploads/sunfounder/original/1X/31d94fe96207fd1d00679a08d72195883163a81e.jpeg)

I have already enabled the SSH radio button on the RasPi but besides that I’m out of ideas.

Any suggestions on how to correct this problem?

Thanks!

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [May 28, 2024, 7:11am UTC](https://forum.sunfounder.com/t/remote-desktop-access-for-raspberry-pi/1153/2 "2024-05-28T07:11:07Z")

</div>

1.Have you configured the network or connected an Ethernet cable to your Raspberry Pi?  
2.Or have you connected a display, mouse, and keyboard to your Raspberry Pi, obtained the IP address, and then used the PuTTY tool to establish an SSH connection?  
[https://docs.sunfounder.com/projects/raphael-kit/en/latest/appendix/login\_windows.html#login-windows](https://docs.sunfounder.com/projects/raphael-kit/en/latest/appendix/login_windows.html#login-windows)
