# Trying to reset too the play mode on the Galaxy RVR

**URL:** <https://forum.sunfounder.com/t/trying-to-reset-too-the-play-mode-on-the-galaxy-rvr/4043>\
**Category:** Learning kit for Arduino\
**Created:** [November 20, 2025, 6:43pm UTC](https://forum.sunfounder.com/t/trying-to-reset-too-the-play-mode-on-the-galaxy-rvr/4043 "2025-11-20T18:43:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ArronRLeever](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@ArronRLeever](https://forum.sunfounder.com/u/ArronRLeever)\
**Post date:** [November 20, 2025, 6:43pm UTC](https://forum.sunfounder.com/t/trying-to-reset-too-the-play-mode-on-the-galaxy-rvr/4043/1 "2025-11-20T18:43:41Z")

</div>

Hello, I’m new here and bought the galaxy RVR. I had fun playing with it in the play mode and decided to move onto the lessons for coding after a few lessons I wanted to reset it back to the play mode too bring into my class, but I have downloaded the zip-file and opened the Ino code into Arduino IDE, downloaded the correct libraries it states but every time I go to test the code before uploading it I get an error on the #include rgb.h stating no file or directory, I’ve tried to trouble shoot it by looking online and through the forums but can’t find anyone having a similar issue. any help would be much appreciated

-Arron

---

<div class="post-metadata">

**Author:** ![SunFounder\_Moderator](https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/32.png) [@SunFounder\_Moderator](https://forum.sunfounder.com/u/SunFounder_Moderator)\
**Post date:** [November 21, 2025, 3:53am UTC](https://forum.sunfounder.com/t/trying-to-reset-too-the-play-mode-on-the-galaxy-rvr/4043/2 "2025-11-21T03:53:03Z")

</div>

You need to download the complete .zip code package.  
[https://github.com/sunfounder/galaxy-rvr/archive/refs/heads/main.zip](https://github.com/sunfounder/galaxy-rvr/archive/refs/heads/main.zip)

After successfully downloading the package, unzip it.

Navigate to the unzipped folder and open the galaxy-rvr.ino file directly. It should open automatically in the Arduino IDE. Then, upload the code as usual.

If you still encounter upload errors, please provide a full screenshot of the entire Arduino IDE window for us to check.