My robot hat doesnt have the green blinking light to zero the servo. How do I zero the servo before I finish putting it together?
Which robot do you have, and what is the version of your Robot HAT? Could you please take a photo of your Robot HAT for us to see?
For models like the PiCar-X, there is a dedicated tutorial on how to perform servo zeroing. You can find it here: Servo Adjust(Important) — SunFounder PiCar-X Kit documentation
there is supposed to be a green blinking light by P11 to set the servo I can see it when I watch the tutorial but it is not there on mine. same model of robot hat.
Please refer to the video we provided.https://drive.google.com/file/d/1jaQayYK0K3Z21mg9gFnj31V30N_jLMCR/view?usp=drive_link
After your Robot HAT powers on, when you short-press the ZERO button twice, does the LED near D6 light up and blink?
It is recommended that you record a short video and provide it to us for confirmation. If an issue is identified, we can arrange to send you a replacement Robot HAT.
It is telling me new users cant upload attachments. I cannot send the video.
is there somewhere I can email it?
You can upload the recorded video to your own OneDrive and then share the video link with us for viewing. Please ensure you grant us permission to access the video link. It is recommended to set the permission to “Anyone with the link can view.”
https://drive.google.com/file/d/18DNz4Sj1WqkbjHBaONkHAesZyuvxp2Rd/view?usp=drivesdk this is the link for the video.
Please contact service@sunfounder.com to provide your detailed address to get a robot hat.