Imcompatibility Pironman with Camera connector and Power Switch Converter

[SunFounder_Moderator]

You’re right, the switch converter and standoff can interfere with the camera cable’s path.
Here are two workarounds:

Carefully route the cable by gently bending it around the standoff.

Some users have solved this by making a small cut in the switch converter to create a clean path for the cable.
For pictures and details, check out this forum thread:

Pironman 5 MAX Camera Installation

I am happy to report that I resolved the problem with the camera cable. It required some modifications which I have photo documented and will include in this discussion. I did not have to purchase another special FPC camera ribbon cable, which would have certainly broken if I persisted in trying to get it to fit. All I had to do was put a notch in the Pi 5 Power Switch Converter board to allow a more or less vertical approach of the ribbon cable to the motherboard camera socket. This is the mod…