Pironman board power problem

[SunFounder_Moderator]

Already replied to your question on this thread, check it out.

Pironman v2 case ssd stop at random time

You use a Type-C cable instead of a USB bridge to connect the SSD, after startup, check the working status whether the crash problem still occurs. If you have a multimeter, after you start the Pironman, measure the output voltage of 5V and GND of GPIO. I hope you can provide us with a video of the problem so that we can analyze and solve the problem. If the problem is caused by hardware, we will arrange to send you the corresponding hardware module.